How to maintain inflatable boats? Direct sales from the inflatable boat factory teach you.
Release time:
2022-10-11 10:29
Source:
Inflatable boats are a popular and convenient means of transportation for long-distance sailors. They are very easy to maintain and can be deflated or simply stored on the deck during long trips. However, even though they are easier to maintain than small boats made of fiberglass, they still need to be kept in good condition for as long as possible. Below, the inflatable boat factory direct sales will teach you how to maintain inflatable boats.
1. UV Protection
The inflatable boat factory direct sales states that frequently used inflatable boats are exposed to a lot of sunlight. Either buy inflatable boats made of high polyamide fiber that can resist UV damage, or you need to make a canvas cover for the boat using PVC. Depending on where and when you sail, storing the inflatable boat in the dark can extend its lifespan. However, make sure the boat is not too cold—close to freezing or at freezing point can degrade the material.
2. Keep inflated as much as possible.
The inflatable boat factory direct sales says that leaving the inflatable boat in a deflated state will accelerate the separation, friction, and damage of the joints. It should be inflated to the pressure recommended by the manufacturer. Moreover, over time, many inflatable boats will leak air, so regular checks and inflation are necessary.
3. "Old Carpet" Skill
If you want to dock at a pier, you can bring an old carpet on the boat to protect your inflatable boat.
4. Cleaning
If conditions allow, wash your inflatable boat with fresh water after use, removing any sand and salt stuck to it. Wiping with a damp cloth is also acceptable. If you must use soap, use a mild dish soap.
5. Avoid using detergents.
Do not use multipurpose cleaners, brighteners, or any other products on your inflatable boat; just clean it with fresh water.
6. Correct Inflation Steps
When inflating your inflatable boat, fill each air chamber in a clockwise direction along the boat until it takes shape. Then, fill each air chamber on the opposite side of the boat to the specific pressure level indicated by the boat. Do not overinflate. When finished, there should only be a small amount of "space" for your thumb to press.
7. Thermal Expansion.
The inflatable boat factory direct sales states that you should know that air expands when heated and contracts when cooled. If you inflate the inflatable boat in cool air and then the temperature rises significantly, please perform the thumb test on the inflatable boat again and release some air until the thumb press "space" returns to normal.
8. Beware of Sharp Objects.
The inflatable boat factory direct sales states that inflatable boats do not like sharp objects or repeated friction in the same area. Be cautious of knives or fish hooks, as well as anything that may cut its surface. When the boat is ashore, avoid dragging it over rocks or shells, and if you want to approach any barnacle-infested pier, bring a carpet.
9. Friction
Friction is also a source of trouble for inflatable boats. Regularly check the surface of the inflatable boat for possible friction points. This may be caused by repeatedly using paddle lines or even coolers in the same position.
10. When the hull is punctured
The inflatable boat factory direct sales reminds everyone that even with good intentions, the hull can sometimes be punctured or leak. Apply soapy water and observe the bubbles formed to find the leak point. Carry a repair kit with you, and you can patch it yourself. However, it may be difficult to secure the patch tightly enough, so please follow the instructions very carefully.
Related News
The inflatable boat factory's direct sales say that the pace of life is getting faster and leisure (free) entertainment is essential. Some people relieve stress through travel, while others do so through leisure and entertainment. Everyone has their own way of relieving stress, and what matters is that we can find relaxation.
How to maintain inflatable boats? Direct sales from the inflatable boat factory teach you.
Inflatable boats are a popular and convenient mode of transportation for long-distance sailors. They are very easy to maintain and can be deflated or simply stored on the deck during long trips. However, even though they are easier to maintain than small boats made of fiberglass, they still need to be kept in good condition for as long as possible. Below, the inflatable boat factory direct sales will teach you how to maintain inflatable boats.
What is the material of inflatable boats like? How to determine the quality? Let's talk about direct sales from inflatable boat factories. There are many types and models of inflatable boats, including those used by the military for crossing rivers and seas, as well as those used for flood control and rescue operations. Below, we will introduce the materials used in inflatable boats from the perspective of direct sales from inflatable boat factories. The materials used to make inflatable boats can generally be divided into two main categories: rubber inflatable boats and PVC inflatable boats.
The manufacturer of inflatable boats tells you about the composition and structure of inflatable boats. The manufacturer of inflatable boats informs you that there are various types and models of inflatable boats. Here, there are high-speed boats designed specifically for speed, fully handmade kayaks, rafting boats for experiencing the thrill of white-water, simple-looking workboats, fishing boats for nearshore fishing, and so on. Since then, many new manufacturers, new models, and new designs have been introduced to the market.
The manufacturer of inflatable boats tells you about the history of inflatable boats.
The manufacturer of inflatable boats tells you about the history of inflatable boats. According to the "Guinness World Records," the history of inflatable boats can be traced back to 880 BC. Ashurnasirpal II ordered his army to continuously inflate skins coated with grease to make them larger so they could cross the river! In ancient China, during the Song and Ming dynasties, people also used sealed inflatable animal skins to cross rivers. The main reason for the use of assault boats is their speed.
Some common knowledge about inflatable boats, explained by the manufacturers of inflatable boats.
The manufacturer of inflatable boats believes that inflatable boats are a type of inflatable craft, which can be divided into fiberglass inflatable boats and rubber inflatable boats. Modern inflatable boats are mainly used by government agencies to carry out maritime tasks, as they are easy to transport, install, and use. They have now become a popular recreational device. Rubber boats are mainly used for rescue, fishing, and entertainment. Inflatable boats are categorized into fiberglass inflatable boats and rubber inflatable boats. Modern inflatable boats are primarily made of fiberglass and are mainly used by government agencies for maritime tasks, but many people also use them for recreation. Rubber inflatable boats are mostly used for rescue and leisure. Inflatable boats are a type of inflatable craft, divided into fiberglass inflatable boats and rubber inflatable boats.
Product recommend