The Mercury ProXS series engines are outboards customized for lure professional anglers. They have excellent performance such as strong thrust, higher speed and faster acceleration, and the horsepower range covers 115-300 horsepower. It has long been favored by professional anglers and is called "Freedom Star" by anglers.

The great gods of Luya know all kinds of fishing methods and throwing skills. If they master the proficient engine operation skills and methods, let the "Freedom Star" stand by and help, and the road to the championship angler will surely be counted. treat.

In order to let the anglers quickly remember and master the main points of engine use and maintenance common sense, Mercury Marine has extracted simple and easy-to-understand points for everyone to learn quickly.

1. Points for attention during operation:

During operation

1. Run at idle speed for 3-5 minutes before the game to warm up the engine.

2. Before running at high speed and approaching the fishing spot, run at idle speed for 3 minutes before stopping.

3. It is strictly forbidden for the boat to stop suddenly when driving at high speed, and it is strictly forbidden to switch gears directly from the forward gear high speed position to the reverse gear fuel door position when the engine is running. The idle speed is required for 15 seconds when switching. Otherwise, the engine will stall and the water will flow back into the engine, causing serious failures such as engine cylinder explosion and connecting rod bending.

4. During sailing, observe the water level to prevent collision damage to the propeller or gearbox.

5. In case of aquatic plants, observe whether the drainage of the cooling water channel is normal to prevent the aquatic plants from blocking the water inlet and affecting the cooling of the body.

two. Alarm prompt:

1. When starting up, a sound of alarm means that the machine is self-checking normally.

2. If the alarm sounds intermittently, please slow down and contact the dealer in time to determine the cause of the fault.

3. If the alarm continues to sound for a long time, be sure to stop the machine immediately and contact the dealer to find out the cause of the fault.

three. Precautions for engine storage

If the outboard motor is stored in non-use season or stored for a long time (2 months or longer) without use, it is recommended to complete the following storage procedures before storage.

Storage time is greater than 2 months or longer

1. Ship ashore, rinse with fresh water, and store in dry storage.

2. Add fuel stabilizers to protect the health of the fuel system.

3. Apply anti-rust agent to metal parts to prevent corrosion.

4. Special lubricant, thorough lubrication (propeller shaft, rotating shaft frame, bearing and coupling).

5. Check whether the gearbox housing is damaged or the paint surface is damaged; drain and replace the gear oil.

6. Remember to store the engine vertically.

7. The storage battery should be stored in a cool and dry place, and the level of electrolyte should be checked regularly and the battery should be recharged.

Four. Engine maintenance tips:

Precautions for maintenance

1. The first maintenance of the engine must be performed for the first 20 hours of operation;

2. If the annual use time is less than 100 hours, the following maintenance items need to be completed: